Doulton W9381000 RIO 2000 High Flow Multi Candle Filter Module

Doulton W9381000 RIO 2000 High Flow Multi Candle Filter ModuleSpecifications

Doulton W9381000 Rio 2000 High-Flow Multi Candle Filter Module Specs:
  • Micron Rating Absolute (>99.99%): .9 Ám
  • Micron Rating Nominal (>99.9%): 0.5 to 0.8 Ám
  • Maximum Working Pressure: 100psig (689kPa)
  • Flow Rate: up to 520 gallons (2000 liters) per hour at 3 bar pressure
  • Flow Rate: up to 390 gallons (1500 liters) per hour at 4 bar pressure
  • Recommended cleaning frequency: when flow rate is noticeably lower or every 3 months
  • Recommended change frequency: 12 months


Installation

Doulton W9381000 Rio 2000 High-Flow Multi Candle Filter Module Maintenance:
  • Due to filtration of particulate contaminants from the water during use, the flow of water from the filter may reduce over a period of time. To return the water flow to its normal level simply remove, clean and re-fit the cartridge assembly.
  • 1. Isolate the water supply to the filter, vent any pressure and unscrew the filter body. Care should be taken, as it will be full of water.
  • 2. The cartridge assembly can now be removed and cleaned, taking care at all times not to contaminate the inside of the unit.
  • 3. Take the assembly to the sink and stand it upright on the base moulding.
  • 4. Loop the cleaning brush (supplied with the filter) under one of the six ceramic candles, hold under running water and slide the brush up and down until the ceramic is clean. Repeat the cleaning operation on all six ceramic candles, taking care at all times not to contaminate the inside of the unit. Alternatively, each of the six filter candles can be removed and cleaned individually.
  • 5. To re-fit the cartridge assembly, ensure that the cartridge assembly is fitted into the sump of the filter with the manifold uppermost.
  • 6. Screw the sump gently into the filter head, ensuring that the manifold locates correctly into the head and tighten until a seal is made. Do not over-tighten.

Your Price: $