GE Merlin Tankless Reverse Osmosis System

GE Merlin Tankless Reverse Osmosis SystemGE Merlin Tankless Reverse Osmosis System Replacement Filters:
    GE Merlin Tankless Reverse Osmosis System Replacement Filters:
    • Stage 1: The needs to be replaced every 6 months.
    • Stage 2: The needs to be replaced every 2-4 years.
    • Stage 3: The needs to be replaced every 2-4 years.
    • Stage 4: The needs to be replaced every 6 months.
    GE Merlin RO System Replacement Parts:
    • Housing Sump O-Rings: The should be replaced every couple of filter changes or when there is damage to the o-ring. Use to keep the oring effective at sealing the housing sumps.
    GE Merlin RO System Accessories:
    • Optional Accessory:
    • Optional Part - Recommended when line pressure under 40 PSI:

    The GE Merlin Tankless Reverse Osmosis System has been discontinued by the manufacturer. There is no direct replacement available. Purchase the alternate Evolution Tankless Reverse Osmosis System available below. The Evolution-RO1000 is similar to the GE Merlin but with a new and improved design. The Evolution-RO1000 is capable of 1000 gallons per day.
    GE Merlin Tankless Reverse Osmosis System Specs:
    • Materials of Construction: High durability Noryl and polypropylene construction provide years of dependable service
    • Average Permeate Flow Rate: 0.5 Gallons Per Minute
    • Average Gallons Per Day: 720 GPD
    • Uses Line Pressure (>40 psi). recommended with all Merlin purchases because the Merlin operates best at 60 psi.
    • Average TDS Rejection: 95% NaCI based on 50 psi at 77F
    • RO System Height: 17.05 inches
    • RO System Length: 20.34 inches
    • RO System Depth: 9.68 inches
    • Carbon PreFilter Height x Depth: 17 inches x 2.9 inches
    • RO Membrane Height x Depth (The GE Merlin uses 2 Membranes): 18.75 inches x 3.16 inches
    • Carbon PostFilter Height x Depth: 10" x 2" (254 mm x 50.8 mm)
    GE Merlin Tankless Reverse Osmosis System Contaminant Reduction:
    • The GE Merlin RO System has been tested according to NSF/ANSI 58 for reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58. The substances are: Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Nitrate, Nitrite, Radium 226/228, Selenium and TDS.

    Special Order (1-2 week lead time)
    Special Order (1-2 week lead time)
    Your Price: $