Omnipure CL10ROT33-B Inline Water Filter
 | Omnipure CL10ROT33-B Filter Replacement Information:- The Omnipure CL10ROT33-B inline filters should be replaced every 1500 gallons or 1 year depending on the quality of your water.
- Used as an inline granular activated carbon filter in Stage 5 of the 5-Stage PuROLine 5000 Reverse Osmosis System.
- The Omnipure CL-Series CL10ROT33-B 1/4" inline filter can be used in many RO systems as a postfilter for final polishing of the water.
- The Omnipure CL10ROT33-B inline filter is the same as the Ametek INCF-10, Omnipure K2533 BB, and P3916.
Omnipure CL10ROT33-B Inline Water Filters can replace:- Omnipure CL10ST-T33 & CL10STT33-B Water Filter
Omnipure CL10ROT33-B GAC Inline Filter Contaminant Reduction:- Degree of Nominal Filtration: 5 Microns
- Chlorine Taste & Odor Reduction: Class 1
Omnipure CL10ROT33-B Water Filter Specs:- Filter size: 2" W x 10" L
- Max Pressure: 125 psi
- Max Temperature: 100F (38C)
- Volume (cubic inch): 16.6
- Flow Rate: .5 gpm
- Filter Life: 1 year or 1500 gallons
- Pipe Size NPT: 1/4"
- Omnipure CL10ROT33-B Inline Water Filters have been tested for performance under NSF Standard 42.
Usually In Stock
|
|